Brand: Jim Blurton
Model: T613SE8
The Snakehead fire tongs have been designed to steadily hold the shoe or steel whilst forging and shaping, hot or cold. The tongs are forged from one piece of steel and ensures the tongs are easy to maintain even with rigorous everyday use. Manufactured with curved reigns and a 16″ long handle to ke..
110.00€
Ex Tax:88.71€
Brand: Jim Blurton
Model: 728-0003-017
Spare handle for Jim Blurton’s driving hammer. Wedge and brass pin included for better and more secure application...
21.20€
Ex Tax:17.10€
Brand: Jim Blurton
Model: 728-0002-010
Made from S1 tool
steel, an air hardened tool steel which is easily maintained. This hand
held tool is designed to draw a clip with a minimum length 300mm. The
ergonomically designed handle is made out of 27 x 19mm oval...
72.90€
Ex Tax:58.79€
Brand: Jim Blurton
Model: 728-0001-017
This stylish hammer is very well balanced and is a pleasure to use.
The jaws are designed with an inner cutting edge which will ring off
nails with ease. The handle is made from high quality hickory and is
approximately 15” in length. The handle is thin which allows a degree of
whip and is g..
134.00€
Ex Tax:108.06€
Brand: Jim Blurton
Model: 729-0003-006
Made from S1 tool steel, an air hardened tool steel which is easily
maintained. This hand held pritchel is designed to fit E Head Nails and
has a minimum length 300mm. The ergonomically designed handle is made
out of 27 x 19mm oval...
74.50€
Ex Tax:60.08€
Brand: Jim Blurton
Model: 731-0001-509
Manufactured form polished stainless steel this is a teaching aid for
foot trimming. A handy tool for assessing the medial or lateral hoof
balance. To use this tool lay it down the back of the leg with the T
piece across the heel of the foot for a guide to see if the heels are
level...
56.40€
Ex Tax:45.48€
Brand: Jim Blurton
Model: 732-0007-003
A carry tong with tapered ends shaped like a nail head to ensure a tight hold on the shoe. It is suitable for a wide range of horseshoe sizes. With these tongs you can apply an even pressure to the shoe when fitting...
70.00€
Ex Tax:56.45€
Brand: Jim Blurton
Model: JBBP
This hammer is made of EN24 tool steel hardened and temper to maximum 58
Rockwell. This is an extremely well balanced hammer designed for
drawing clips. It has an 18” handle made from high quality hickory and
is grooved for grip. Extra security has been applied to the fitting of
the handle v..
160.00€
Ex Tax:129.03€
Brand: Jim Blurton
Model: JBCS
The head is made from S1 tool steel which is an air hardened tool steel
and is easily maintained. This stamp is designed to fit E Head Nails and
ideal for working on concave steel due to the narrower head which does
not mark the side of the steel. It incorporates a welded on steel handle
whi..
88.00€
Ex Tax:70.97€
Brand: Jim Blurton
Model: 728-0002-528
This hammer is made of EN24 tool steel hardened and temper to maximum 58
Rockwell. This is an extremely well balanced hammer designed for
drawing clips. It has an 18” handle made from high quality hickory and
is grooved for grip. Extra security has been applied to the fitting of
the handle v..
160.00€
Ex Tax:129.03€
Brand: Jim Blurton
Model: 743-0002-040
This is an oval shaped shoe and is usually used on horses with
pre-navicular and navicular disease. The frog is not supported, as the
bar extends behind it, which can be a problem when used with very flat
feet, as the frog will “drop through” because it is unsupported. In this
case, a heart-..
36.00€
Ex Tax:29.03€
Brand: Jim Blurton
Model: 743-0002-048
Heart-bar shoes can be used to help treat laminitis and flat feet. The
shoe mimics the unshod foot, as the frog and wall are restored to a
natural pattern of weight bearing. The support offered to the coffin
bone is crucial for speedy recovery and realignment. The Heart Bar shoe
not only pro..
36.00€
Ex Tax:29.03€